NEC Univerge SV9300 - Page 47

Issue 1.0 Spectrum Enterprise
38 SIP Trunk Programming Guide
CM 7601>000>2000 (Conversion Block 000/Destination Stn.2000)
CM 08>379>1 (Default: Provide Caller ID Display)
CM 08>603>0 (Caller ID Display on Analog Terminal)
CM 15400>15>7 (Default: Caller ID Number on Upper Line/ Name on Middle Line)
CM 8A5000>176>15 (Default: Follow CM 8A5xxx>186 Setting)
CM 8A5000>183>00 (Send Calling Party Name Assigned To CM77 Y=1)
CM 8A5000>186>03 (Send Calling Party Number Assigned to CM12 YY=51)