NEC VERSA VXi - System Security Setup

System Configuration and Setup 2-13
System Security Setup
Use the System Security Setup to protect the system from unauthorized access.
System Security Setup
Parameter Default Setting Alternate Setting(s)
Security Mode Password SmartCard, FingerPrint
Assign Supervisor Password Press Enter
Assign User Password Press Enter
Boot Password Required
1
No Yes
Resume Password
Required
2
No Yes
Assign Supervisor
SmartCard
Press Enter
Assign User SmartCard Press Enter
Clear Supervisor SmartCard Press Enter
Clear User SmartCard Press Enter
Assign Supervisor
FingerPrint
Press Enter
Assign User FingerPrint Press Enter
Clear Supervisor FingerPrint Press Enter
Clear User FingerPrint Press Enter
Assign HDD Password Press Enter
Internal HDD password Disabled Enabled
1
Option is not available until supervisor password is set up
.
2
Only active when Boot Password is set to Yes.
!
Assign Supervisor Password — Establishes password protection for entering the BIOS
Setup utility, booting the system, and resuming from Suspend.
!
Assign User Password — Establishes a user password once a supervisor password is set.
The user password allows the system to boot and resume from Suspend and Save-to-File.
!
Boot Password Required — Indicates whether or not a password is required to boot the
system.
!
Resume Password Required — Indicates whether or not a password is required to resume
the system. Boot Password must be defined to activate this parameter.
!
Assign Supervisor SmartCard — Establishes access privileges for entering the BIOS Setup
utility, booting the system, and resuming from Suspend.
!
Assign User SmartCard — Establishes user access once supervisor access is set. The user
privileges allows the system to boot and resume from Suspend and Save-to-File.
!
Clear Supervisor SmartCard — Removes the security setting for Supervisor access.
!
Clear User SmartCard — Removes the security setting for User access.
!
Assign Supervisor FingerPrint — Establishes access protection for entering the BIOS Setup
utility, booting the system, resuming from Suspend, and applications.