NEC VERSA VXi - Setting a Personal Code; NEC Info Center; Installing the NEC Info Center; Uninstalling the NEC Info Center

2-32 System Configuration and Setup
Setting a Personal Code
Use the following procedure to set a personal code.
1.
From the Windows Start menu, select Programs, Personal Code, and then Personal Code
Setting Utility.
The Personal Code Setting utility screen appears. This screen allows setting of a personal
code, up to 5 digits long.
2.
Click on one number from each row for each digit of your personal code. Press
Enter
when
done.
3.
A dialog box appears asking if you want to enter the personal code. Click Yes.
4.
A dialog box appears stating the new personal code has been entered. Click OK.
5.
Click Exit to exit the Personal Code Setting utility.
To test the personal code, shut down the system (do not select Shutdown and Restart). Power on
the system using the Power button. A green LED next to the personal code buttons lights and the
screen remains black. Enter a personal code using the personal code buttons and press the
personal code Enter key. The system boots when the correct code is entered.
The utility also lets you erase the current personal code and enter a new personal code. There is
an Options button that allows setting system sounds, siren and beeps, to alert you that a correct
or an incorrect personal code has been entered.
NEC Info Center
The Application and Driver CD contains the NEC Info Center, a fully navigational online
document that provides information for the traveling professional and an online version of
portions of the printed user’s guide.
Installing the NEC Info Center
To install the NEC Info Center simply follow the instructions, presented earlier in this chapter,
for launching the Application & Driver CD and installing the software. For the most current
version of the NEC Versa VXi User’s Guide, check NEC web site at http://www.neccomp.com/.
Uninstalling the NEC Info Center
Use one of the following methods to uninstall the NEC Info Center.
!
Use the following to uninstall the NEC Info Center with the Windows Add/Remove
Programs feature.
1.
Go to Start, Settings, Control Panel, and double click Add/Remove Programs.
2.
Use the scroll bar, if necessary, to display the NEC Info Center item.
3.
Highlight NEC Info Center and click the Add/Remove button.
4.
Select Automatic as the uninstall method and click Next.
5.
Click Finish to complete the uninstall.
6.
When the uninstall is complete, click OK and close the Control Panel window.