2-18 System Configuration and Setup
Custom Timeout Options
Option Definition
CPU Speed Control Sets CPU performance at one of four levels.
Hard Disk Timeout Sets the time delay before the hard disk powers
down.
Video Timeout Sets whether to timeout the video or not.
Peripheral Timeout Sets whether to timeout the peripheral or not.
Audio Device Timeout Sets the time delay before the audio device powers
off.
Standby Timeout Selects the system standby timeout period.
Auto Suspend Timeout Defines how much time elapses before the Suspend
Option occurs (Suspend or Save to File).
!
LCD Suspend — Allows you to suspend the system when the LCD panel is closed.
!
Suspend Option — Specifies either Suspend or Save to File (STF) as the default power
management mode.
!
Automatic STF — Enables the system, after 30 minutes in Suspend mode, to save the
current working environment to a special file on the hard disk and to power down the
system.
If Auto Save to File is set to Off and the save-to-file area is present on the hard drive,
pressing the
Fn-Power/Sleep
key combination puts the system into Save to File mode.
!
Panel Brightness — Selects the LCD screen brightness.
!
Suspend Warning Tone — Specifies whether the system warning tone sounds when
Suspend mode starts. It is best to keep this option enabled.
!
Wake Up from Suspend Alarm/Resume Alarm Time — Allows the alarm to wake up the
system from Suspend. Designates the time parameter in five minutes increments.(Not
applicable in Windows 98/2000 with ACPI.)
!
Intel SpeedStep Technology — Optimizes CPU performance when the system is powered
by AC or by battery.
To Next Page
Loading...
