P2125EN00
01 - 2008
8
4 - SPECiAL SELECT.
4.1 - ViRTUAL SELECT.
4.2. - ViRT. PRiCE RET.
4
sP e c I a l s e l e c t I o n s
4.1
vI r t u a l s e l e c t I o n s
This function is used to dene a pair of selections that can be sold
at a price dierent from the sum of the two selections, using a single
selection number. 10 virtual selections can be programmed (70 to
79).
4.2
r
e t u r n o f v I r t u a l P r I c e
This function is used to dene, in the event of failed second dis-
pensing in a virtual selection, not to cash the price of the second se-
lection (only if an MDB payment system or validator are used). With
other payment systems, it can be decided whether or not return the
entire amount.
4.3 - TWO-MOTOR SELECT
4.4 - PHOTOCELL PARAM.
4.3
tw o -m o t o r s e l e c t I o n s
With this function the operation of two motors for dispensing long
shaped products can be combined, specifying the selection number
of the second motor.
The rst motor number will be the selection number, while the selec-
tion number of the associated motor will remain disabled.
4.4
P
h o t o c e l l P a r a m e t e r s
The vending machine can be tted (as standard feature or as op-
tional according to the model) with a device that detects the pas-
sage of dispensed products.
4.4.1 - SETTLiNG TiME
4.4.2 - MONEY RETURN
4.4.3 - EMPTY SEL.CONTR.
4.4.1
se t t l I n g t I m e
This function is used for setting an additional rotation time to the
spiral beyond the limit switch to allow the selected product to fall in
the dispensing compartment.
r
e t u r n o f m o n e y
This function is used for enabling the return of the amount paid in
the event the photocells do not detect the passage of the selected
product.
4.4.3
e
m P t y s e l e c t I o n c o n t r o l
This function is used for disabling the selection that recorded a pho-
tocell error, i.e. failed product dispensing/detection.
To Next Page
Loading...
Need help?
General
