Necta Rondo - Time Bands; Set Date and Time

P2125EN00
01 - 2008

14
2.1.1.3.4 - TiME bAND 3
2.1.1.3.5 - TiME bAND 4
2.1.1.3.4
tI m e ba n d 3
The time bands are programmable for beginning and end time by
hours (00 to 23) and minutes (00 to 59). If the values for start and
end of the time band are set to 00.00 the time period is disabled.
2.1.1.3.5
t
I m e ba n d 4
The time bands are programmable for beginning and end time by
hours (00 to 23) and minutes (00 to 59). If the values for start and
end of the time band are set to 00.00 the time period is disabled.
2.1.1.3.3 - TiME bAND 2
2.1.1.3.3
tI m e ba n d 2
The time bands are programmable for beginning and end time by
hours (00 to 23) and minutes (00 to 59). If the values for start and
end of the time band are set to 00.00 the time period is disabled.
2.1.1.3 - TiME bANDS
2.1.1.3.1 - SET DATE & TiME
2.1.1.3
tI m e b a n d s
Four programmable time bands are provided for selling products at
dierent prices.
Time band 0 is not programmable and covers the 24 hours.
2.1.1.3.1
s
e t da t e a n d tI m e
This function is used for setting the reference time given by an inter-
nal clock programmable for:
day/month/year/week-day 1-7 (1=Monday, 2=Tuesday, etc…) and
then hour/minutes/seconds.
2.1.1.3.2 - TiME bAND 1
2.1.1.3.2
tI m e ba n d 1
The time bands are programmable for beginning and end time by
hours (00 to 23) and minutes (00 to 59). If the values for start and
end of the time band are set to 00.00 the time period is disabled.