3
© by NECTA VENDING SOLUTIONS SpA 07-2002 148 03
USING THE VENDING MACHINES OF HOT
DRINKS IN OPEN CONTAINERS
(Ex.: plastic cups, ceramic cups, jugs)
The vending machines of drinks in open containers should
be used only to sell and dispense drinks obtained by:
- brewing products like coffee and tea;
- reconstituting instant and lyophilized products;
These products should be declared by the manufacturer as
"suitable for automatic vending" in open containers.
The dispensed products should be consumed immedi-
ately. They should never be preserved and/or packed
for later consumption.
Any other use is unsuitable and thus potentially dangerous.
POSITIONING THE VENDING MACHINE
The vending machine is not suitable for outdoor installation.
It must be installed in a dry room where the temperature is
between 2°C and 32°C, and not where water jets are used
for cleaning (e.g. in large kitchens, etc.).
The machine should be placed close to a wall, so that the
back panel is at a minimum distance of 4 cm from it and
correct ventilation may be ensured.
The machine must never be covered with cloth or the like.
The machine should be positioned with a maximum inclina-
tion of 2°.
If necessary provide proper levelling by way of the adjust-
able feet included (see Figure 11).
WARNING FOR INSTALLATION
The machine installation and the following mainte-
nance operations should be carried out by qualified
personnel only, who are trained in the correct use of the
machine according to the standards in force.
The machine is sold without payment system, therefore the
installer of such a system has sole responsibility for any
damage to the machine or to things and persons caused by
faulty installation
.
The integrity of the vending machine and its conformity
with the rules and regulations in force for its relevant
systems must be checked by qualified personnel at
least once a year.
All packing materials shall be disposed of in a manner which
is safe for the environment.
PRECAUTIONS IN USING THE MACHINE
The following precautions will assist in protecting the
environment:
- use biodegradable products only to clean the machine;
- adequately dispose of all containers of the products
used for loading and cleaning the machine;
- switch the machine off during periods of inactivity, thus
achieving considerable energy savings.
WARNING FOR SCRAPPING
Whenever the machine is to be scrapped, the laws in force
regarding environment protection should be strictly ob-
served. More specifically:
- ferrous and plastic materials and the like are to be
disposed of in authorized areas only;
- insulating materials should be recovered by qualified
companies.
DIMENSIONS
Height 1830 mm
Width 850 mm
Depth 780 mm
Overall depth with door open 1540 mm
Weight:
thgieWstinU2tinU1tnatsnI
gK
532522022
To Next Page
Loading...
Need help?
General
