GCX
Mounting Plate
An optional mounting plate is available
froin Mallinckrodt for the
N-3 95. This mounting plate fits standard, commercially available
GCX
inount brackets, and is used to securely mount the inonitor
to
a
wall or roll stand.
The plate attaches to the bottom of the N-395 monitor as shown
in Figure
3.
For further instructions regarding connecting the
plate to GCX brackets, refer to the illustrated
directioils for use
included with the GCX mounting plate.
Figure
3:
GCX
Mounting
Plate
To Next Page
Loading...
