A
description of each menu item is included in the following
paragraphs.
LIMITS
7
WARNING:
Each time the monitor is used, check alarm
limits
to
ensure that they are appropriate for the patient
being monitored.
When the N-395 is first turned on, alarin limits are set to their
power-on default values. Qualified service personnel, using the
instructions described in the N-395 service manual, may change
power-on default alarm limits.
Alarm limits inay be changed
froin their power-on default values
if necessary, as described below.
Liinit changes made will
remain
in effect until changed again or until the N-395 is turned
off.
Viewing
Current Alarm Limits
To view the current alarm limit values froin the main menu,
press the LIMITS softkey. The current upper and lower alarin
limits for %SpOz and pulse rate are displayed. The current
SatSeconds
alarm liinit is also shown.
To Next Page
Loading...
