Menu
Structure
The four softkeys on the front panel are used to view or adjust
the following N-395 settings or functions:
%SpOz and pulse rate alarm limits
Pleth or Blip view
s
Time and date settings
Data port baud rate settings
Trend data viewed
(%Sp02, pulse, or both)
""Zoom" factor of trend data
Graph of
trend data (histogram)
e
Delete all trend data
Print
trends
SatSeconds
limits
Language displayed on screen or data port
Nurse call settings
Analog output calibration voltage settings
Display backlight
odoff
Menu items are selected by pressiilg and releasing the
corresponding
softkey directly below the item. Refer to Table
2:
Limits Meiiu to access menu items.
Note:
If,
after accessing
a
submenu, no buttons are pressed for
10
seconds, the display will time out and return to the
maill menu. Exceptions to this are the clock and trend
menus, which will time out in
5
minutes and the analog
port calibration menu, which times out in
2
minutes.
To Next Page
Loading...
