combinations of equipment must be in compliance with
IIEC
Standard
601-1-1
systems requirements. Anyone who
connects additional equipment to the signal input port or
signal output port
(N-395
data port connector) configures a
medical system and is therefore responsible for ensuring that
the system complies with the requirements of system
standard
IEC
Standard
6011-1-8
and the electromagnetic
compatibility system standard
IEC
Standard
601-1-2.
The
N-395
accuracy may degrade if it is connected to secondary
110
devices when the instrument is not connected to earth
refereaace.
To
ensure accurate readings, consider the environmental
conditions that are present and the condition of the patient. See
the appropriate sections of the
manual for specific safety
information related to
these conditions.
To Next Page
Loading...
