NetApp HCI User Manual

Option Steps
Your management node has external connectivity. 1. Click the drop-down arrow next to the cluster
you are upgrading.
2. Click Firmware Only, and select from the
upgrade versions available.
3. Click Begin Upgrade.

The Upgrade Status changes
during the upgrade to reflect the
status of the process. It also
changes in response to actions
you take, such as pausing the
upgrade, or if the upgrade returns
an error. See Upgrade status
changes.

While the upgrade is in progress,
you can leave the page and come
back to it later to continue
monitoring the progress. The
page does not dynamically
update status and current version
if the cluster row is collapsed. The
cluster row must be expanded to
update the table or you can
refresh the page.
You can download logs after the upgrade is
complete.

NetApp HCI Specifications

General

Product Type	Hyperconverged Infrastructure (HCI)
Data Services	Data protection, encryption
Connectivity	10 GbE, 25 GbE, 40 GbE, 100 GbE
Hypervisor Support	VMware vSphere
Management Node	Included in the solution
Storage Media	SSD and HDD
Node Types	Compute nodes, storage nodes
Storage Protocols	iSCSI
Data Reduction	Deduplication, compression, thin provisioning
High Availability	Built-in redundancy