NetApp HCI User Manual

• vSphere Web Client: For vSphere 6.5 and 6.7, you have logged out of the vSphere Web Client before
beginning any plug-in upgrade. The web client for these versions will not recognize updates made during
this process to your plug-in if you do not log out. For vSphere 7.0, you do not need to log out of the web
client.
Steps
1.
Enter the IP address for your management node in a browser, including the TCP port for registration:
https://[management node IP]:9443
The registration utility UI opens to the Manage QoSSIOC Service Credentials page for the plug-in.
2. Click vCenter Plug-in Registration.

NetApp HCI Specifications

General

Product Type	Hyperconverged Infrastructure (HCI)
Data Services	Data protection, encryption
Connectivity	10 GbE, 25 GbE, 40 GbE, 100 GbE
Hypervisor Support	VMware vSphere
Management Node	Included in the solution
Storage Media	SSD and HDD
Node Types	Compute nodes, storage nodes
Storage Protocols	iSCSI
Data Reduction	Deduplication, compression, thin provisioning
High Availability	Built-in redundancy