NetApp HCI - Page 246

Option Steps
Your management node has external connectivity. 1. Verify the repository connection:
a. Open the package service REST API UI on
the management node:
https://[management node
IP]/package-repository/1/
b. Click Authorize and complete the following:
i. Enter the cluster user name and
password.
ii.
Enter the client ID as mnode-client.
iii. Click Authorize to begin a session.
iv. Close the authorization window.
c. From the REST API UI, click GET
/packages/remote-repository/connection.
d. Click Try it out.
e. Click Execute.
f. If code 200 is returned, go to the next step.
If there is no connection to the remote
repository, establish the connection or use
the dark site option.
2. Find the upgrade package ID:
a. From the REST API UI, click GET
/packages.
b. Click Try it out.
c. Click Execute.
d. From the response, copy and save the
upgrade package name ("packageName")
and package version (
"packageVersion") for use in a later
step.