NetApp HCI - Page 291

4.
Get task status using task ID from the upgrade applyNodeUpdates response:
curl -X GET "https://<mNodeIP>/k8sdeployer/1/task/<taskID>" -H "accept:
application/json" -H "Authorization: Bearer <ID>"
REST API UI steps
1. Open the management node REST API UI on the management node:
https://<managementNodeIP>/k8sdeployer/api/
2. Select Authorize and complete the following:
a. Enter the cluster user name and password.
b.
Enter the client ID as mnode-client.
c. Select Authorize to begin a session.
d. Close the authorization window.
3. Verify if an upgrade package is available:
a. From the REST API UI, run GET /upgrade/checkNodeUpdates.
b. From the response, copy the task ID.
c. Run GET /task/{taskID} with the task ID from the previous step.
d. From the /task/{taskID} response, verify that there is a more recent version number than the one
currently applied to your nodes.
4. Apply the node OS upgrades:

For node OS, unattended upgrades for security patches are run on a daily basis but the
node is not rebooted automatically. By applying upgrades, you are rebooting each node
sequentially for the security updates to take effect.
a. From the REST API UI, run POST /upgrade/applyNodeUpdates.
b. From the response, copy the task ID.
c. Run GET /task/{taskID} with the task ID from the previous step.
d. From the /task/{taskID} response, verify that the upgrade has been applied.
The upgrade has finished successfully when the PercentComplete indicates 100 and results indicates
the upgraded version number.
Find more information
• NetApp Element Plug-in for vCenter Server
• NetApp HCI Resources Page