NetApp HCI - Page 30


The NetApp Hybrid Cloud Control web UI and API download software packages from the
NetApp online software repository, which uses JFrog Bintray as a distribution hub and
Akamai Technologies for file hosting. Because of this, some URLs or IP addresses might
resolve to other URLs or IP addresses based on the content delivery network. If possible,
you should work with a network engineer to add these URLs or IP addresses to the firewall
rules, using the following general steps:
Steps
1. Use the Wget or cURL utilities to access a URL (repo.netapp.com, for example).
2. Receive a failure to access the URL (different from repo.netapp.com).
3. Edit the firewall rules to allow the new URL.
4. Repeat the above steps until the access attempt succeeds.
The following abbreviations are used in the table:
• MIP: Management IP address, a per-node address
• SIP: Storage IP address, a per-node address
• MVIP: Management virtual IP address
• SVIP: Storage virtual IP address
All ports in the table are TCP unless stated otherwise.
Source Destination Port Description
iSCSI clients Storage cluster MVIP 443 (Optional) UI and API
access
iSCSI clients Storage cluster SVIP 3260 Client iSCSI
communications
iSCSI clients Storage node SIP 3260 Client iSCSI
communications
Compute node BMC/IPMI Management node 111 TCP/UDP NetApp Hybrid Cloud
Control API
communication
Compute node BMC/IPMI Management node 445 NetApp Hybrid Cloud
Control API
communication
Compute node BMC/IPMI Management node 2049 TCP/UDP NetApp Hybrid Cloud
Control API
communication
Compute node BMC/IPMI Management node 137-138 UDP NetApp Hybrid Cloud
Control API
communication