4. Select Restore.
5. Log out and then log back in to confirm that the credentials are now changed.
Upgrade the BMC firmware on your node
After you replace the compute node, you might have to upgrade the firmware version.
You can download the latest firmware file from the drop-down menu on the NetApp Support Site (login
required).
Steps
1. Log in to the baseboard management controller (BMC) UI.
2. Select Maintenance > Firmware Update.
3. From within the BMC console, select Maintenance.
4. From within the Maintenance tab, select Firmware Update from the navigation on the left of the UI, and
select Enter Update Mode.
To Next Page
Loading...
