NetApp HCI User Manual


The power supply units are located differently based on the type of chassis.
See the images below for the locations of the power supply units:
Model Location of the power supply units
2U, four-node NetApp HCI storage chassis

The nodes in your chassis might
look different depending on the
type of nodes (storage or
compute) you have.
H610C chassis
H615C chassis
H610S chassis
2. Unplug the power cord from the power supply unit.
3. Lift the cam handle, and press the blue latch to slide out the power supply unit.

The illustration is an example. The location of the power supply unit in the chassis and
the color of the release button vary depending on the type of chassis you have.

Ensure that you use both hands to support the weight of the power supply unit.

NetApp HCI Specifications

General

Product Type	Hyperconverged Infrastructure (HCI)
Data Services	Data protection, encryption
Connectivity	10 GbE, 25 GbE, 40 GbE, 100 GbE
Hypervisor Support	VMware vSphere
Management Node	Included in the solution
Storage Media	SSD and HDD
Node Types	Compute nodes, storage nodes
Storage Protocols	iSCSI
Data Reduction	Deduplication, compression, thin provisioning
High Availability	Built-in redundancy