NetApp HCI User Manual

1. Open a web browser on a computer that can reach the IPMI network and browse to the IPMI IP address for
the node.
2.
Enter the user name root and password calvin in the login prompt.
3. Upon logging in, click the menu navigation icon at the top left of the page to open the sidebar drawer.
4. Click Settings.
5. Click User Management.
6. Select the Administrator user from the list.
7. Enable the Change Password check box.
8. Enter a new, strong password in the Password and Confirm Password fields.
9. Click Save at the bottom of the page.
10. Repeat this procedure for any other NetApp HCI H610C, H615C, or H610S nodes with default IPMI
passwords.
Find more information
• NetApp SolidFire Active IQ Documentation
• NetApp Element Plug-in for vCenter Server
• NetApp HCI Resources Page

NetApp HCI Specifications

General

Product Type	Hyperconverged Infrastructure (HCI)
Data Services	Data protection, encryption
Connectivity	10 GbE, 25 GbE, 40 GbE, 100 GbE
Hypervisor Support	VMware vSphere
Management Node	Included in the solution
Storage Media	SSD and HDD
Node Types	Compute nodes, storage nodes
Storage Protocols	iSCSI
Data Reduction	Deduplication, compression, thin provisioning
High Availability	Built-in redundancy