EasyManua.ls Logo

NETGEAR AC791L - Install the Battery

NETGEAR AC791L
83 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Get Started
12
Verizon Jetpack® 4G LTE Mobile Hotspot - AC791L
Install the Battery
Before you use your Jetpack, be sure to charge the battery for at least three hours to ensure
a full initial charge. When the battery needs recharging, follow the instructions in Charge the
Battery on page 13.
To install the battery:
1. If the back cover is attached to the Jetpack, remove the back cover by lifting at the
notch on either corner of the Jetpack.
2. Align the gold contacts. Press down gently to secure the battery.
Gold contacts
Battery
3. Line up the 2 tabs on the back cover with the slots at the bottom of the Jetpack, and then
press down along the edges to secure the cover.

Table of Contents

Related product manuals