Customize the Wi-Fi Settings
32
Verizon Jetpack® 4G LTE Mobile Hotspot - AC791L
The following settings are available:
• None. Anyone can access your Wi-Fi network without a password and you are
responsible for charges incurred. NETGEAR recommends that you do not select this
option.
• WP
A2 Personal AES. Strong security that is supported by newer Wi-Fi devices
(default).
• WP
A/WPA2. Strong security that is supported by most Wi-Fi devices. Wi-Fi devices
that use either WPA or WPA2 can connect to the Jetpack.
5. Click the Save button.
A confirmation page displays.
6. Click the Save button.
Your settings are saved.
Note: During this change, all Wi-Fi-connected devices are disconnected
from the Jetpack Wi-Fi network and must reconnect.
Configure the Wi-Fi Channel
The Wi-Fi channel is the active channel used by the Jetpack’s Wi-Fi network. When many
Wi-Fi networks in the same location use the same channel, it can cause interference. By
default, the Jetpack selects the best available channel, but you can specify the Jetpack’s
Wi-Fi channel if you want.
To configure the Wi-Fi channel:
1. From the Jetpack
Admin website home page, select Jetpack Settings > Wi-Fi.
2. To select a different profile, click a Wi-Fi profile button and click the Save button to confirm.
Selecting a different Wi-Fi profile will disconnect all current Wi-Fi connections.
To Next Page
Loading...
Need help?
General
