Control Internet Access
60
Verizon Jetpack® 4G LTE Mobile Hotspot - AC791L
2. Select the Port Forwarding button.
3. In the Application Name field, enter a name describing the application using the port.
For example, enter RandomEmailApp.
4. In the IP field, enter the IP address of the server being accessed.
5. In the Port field, enter the port that is forwarded.
If the application uses more than one port, each port must be forwarded separately.
6. From the Protocol menu, select TCP or UDP.
This is the protocol being used for this application.
7. Click the Add button.
The port forwarding entry is added to the list.
8. Click the Save button.
Your settings are saved.
Remove a Port Forwarding Entry
If you want to stop forwarding any ports, you can remove them from the port forwarding list.
To Next Page
Loading...
Need help?
General
