EasyManua.ls Logo

NETGEAR AC791L User Manual

NETGEAR AC791L
83 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #58 background imageLoading...
Page #58 background image
Control Internet Access
58
Verizon Jetpack® 4G LTE Mobile Hotspot - AC791L
To use MAC filtering to allow specific devices:
1. From the Jetpack
Admin website home page, select Jetpack Settings > Advanced >
MAC Filter.
2. From the MAC Filter Mode menu, select White List (Allow only devices in list).
3. In the Name field, enter the name of the device.
4. In the MAC Address field, enter the MAC address of the device.
5. Click the Add button.
The device is added to the white list.
6. Click the Save button.
Your settings are saved.
Enable or Disable a DMZ
In a demilitarized zone (DMZ) network configuration, a computer runs outside the firewall in
the DMZ. This computer intercepts incoming Internet traffic, providing an extra layer of
protection for the rest of the network, and sending all incoming data to a particular IP
address.
If the DMZ is enabled, then incoming traffic is routed to the computer that uses the IP
address specified by the DMZ settings. If the DMZ is not enabled, the incoming traf
fic is
blocked.
1. From the Jetpack
Admin website home page, select Jetpack Settings > Advanced >
Firewall.
2. Click the DMZ button.
The Destination IP address field appears.

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the NETGEAR AC791L and is the answer not in the manual?

NETGEAR AC791L Specifications

General IconGeneral
BrandNETGEAR
ModelAC791L
CategoryWireless Router
LanguageEnglish

Summary

Get Started

Install the Battery

Provides step-by-step instructions for installing the Jetpack's battery.

Charge the Battery

Explains how to charge the Jetpack's battery using a wall charger or computer.

Use Your Jetpack

Connect to the Jetpack Using Wi-Fi

Explains how to connect devices to the Jetpack via Wi-Fi.

Monitor Data Usage

How to check current and historical data usage on the Jetpack.

Customize the Wi-Fi Settings

Manage Your Jetpack

Update the Jetpack Software

How to update the Jetpack's firmware and software.

Reset the Jetpack to Factory Default Settings

Steps to reset the Jetpack to its original factory default settings.

Control Internet Access

Advanced Settings

Troubleshooting

Questions About Connecting Devices and Internet Access

Addresses common issues with connecting devices and accessing the Internet.

Questions About the Jetpack Battery

Covers common questions related to the Jetpack's battery.

Questions About Improving Wi-Fi Performance

Tips and advice for enhancing the Jetpack's Wi-Fi performance.

Related product manuals