NETGEAR AC791L

Use Your Jetpack
21
Verizon Jetpack® 4G LTE Mobile Hotspot - AC791L
Connect Using WPS
You can add a WPS-enabled computer or device to your Wi-Fi network without a Wi-Fi
password.
 To connect to the Jetpack Wi-Fi network using the device’s WPS button:
1. V
erify the Jetpack is powered on.
2. Open the Wi-Fi Name/Password menu
and select Wi-Fi Protected Setup.
3. Select the main network or the guest network.
4. When prompted, select Start.
5. Within 2 minutes, press the WPS button on your computer or Wi-Fi device.
The computer or Wi-Fi device connects to the Jetpack Wi-Fi network.
Configure a Tethered Connection
Your Jetpack supports a direct connection through a USB cable to a Windows or Mac
computer. (This is commonly referred to as a “tethered” connection.)