EasyManuals Logo

NETGEAR N150 User Manual

NETGEAR N150
107 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #79 background imageLoading...
Page #79 background image
Advanced Settings
79
N150 Wireless ADSL2+ Modem Router DGN1000
Advanced Wireless Settings
To configure advanced wireless settings:
1. Select Advanced > Wireless Settings to display the following screen:
Note: The advanced WPS settings section is not displayed if you selected
WEP as the security option.
2. If you make changes, click Apply. Note that the WLAN settings come from the settings you
made in the Wireless Settings Screen on page 37).
WLAN.
Name (SSID). The service set ID, also known as the wireless network name.
Region. The country where the unit is set up for use.
Channel. The current channel, which determines the operating frequency.
Wireless AP. Indicates if the access point feature is enabled. If disabled, the Wireless
LED on the front panel is off.
Broadcast Name. Indicates if the wireless modem router is configured to broadcast
its SSID.
Security. Indicates if security is configured on the wireless modem router, and if so,
what type of security is configured.
WPS Settings.
Router’s PIN. The PIN number that you use on a registrar (for example, from the
Network Explorer on a Vista Windows PC) to configure the wireless modem router’s
wireless settings through WPS. You can also find the PIN on the wireless modem
router's product label.

Table of Contents

Other manuals for NETGEAR N150

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR N150 and is the answer not in the manual?

NETGEAR N150 Specifications

General IconGeneral
WiFi Technology802.11n
WiFi SpeedUp to 150 Mbps
Frequency Band2.4 GHz
ModelN150
Ethernet Ports4 x 10/100 Mbps
SecurityWPA/WPA2-PSK
AntennaInternal
Weight0.66 lbs

Related product manuals