Troubleshooting
94
N150 Wireless ADSL2+ Modem Router DGN1000
Incorrect Date or Time
Select Security > Schedule to display the current date and time. The wireless modem router
uses the Network Time Protocol (NTP) to obtain the current time from one of several network
time servers on the Internet. Each entry in the log is stamped with the date and time of day.
Problems with the date and time function can include the following:
• Date shown is January 1, 2000. This means the router has not yet successfully reached a
network time server. Check that your Internet access is configured correctly. If you have
just completed configuring the router, wait at least 5 minutes, and check the date and time
again.
• Time is off by one hour. The router does not automatically sense daylight savings time. In
the Schedule screen, select the Adjust for Daylight Savings Time check box.
To Next Page
Loading...
Need help?
General
