To Next Page

To Previous Page

Technical Specifications

N150 Wireless ADSL2+ Modem Router DGN1000

Factory Settings

You can return the wireless modem router to its factory settings. On the bottom of the

wireless modem router, use the end of a paper clip or some other similar object to press and

hold the Restore Factory Settings button

for at least 7 seconds. The wireless modem

router resets, and returns to the factory settings.

Your device will return to the factory

configuration settings shown in the following table.

Feature Default Behavior

Router Login

User Login URL http://www.routerlogin.net or http://www.routerlogin.com

User Name (case-sensitive) admin

Internet Connection

WAN MAC Address Use default address

WAN MTU Size 1492

Port Speed AutoSense

Local Network (LAN)

Lan IP 192.168.0.1

Subnet Mask 255.255.255.0

RIP Direction None

RIP Version Disabled

RIP Authentication None

DHCP Server Enabled

DHCP Starting IP Address 192.168.0.2

DHCP Ending IP Address 192.168.0.254

DMZ Disabled

Time Zone GMT

Time Zone Adjusted for Daylight Saving

Time

Disabled

SNMP Disabled

Firewall

NETGEAR N150 User Manual

Other manuals for NETGEAR N150