Network Maintenance
71
N150 Wireless ADSL2+ Modem Router DGN1000
Run Diagnostic Utilities
The wireless modem router has a diagnostics feature that you can use to perform the
following functions:
• Ping an IP address to test connectivity to see if you can reach a remote host.
• Perform a DNS lookup to test if an Internet name resolves to an IP address to verify that
the DNS server configuration is working.
• Display the Routing table to identify what other wireless modem routers the wireless
modem router is communicating with.
• Reboot the wireless modem router to enable new network configurations to take effect or
to clear problems with the wireless modem router’s network connection.
To run diagnostic utilities:
1. Select Maintenance > Diagnostics to display the following screen.
2. Get diagnostic information as follows:
a. To ping an IP address, fill in the IP address and select Ping.
b. To perform a DNS lookup, fill in the Internet Name and select Lookup.
c. To display the routing table, select Display.
d. Tor reboot the router, select Reboot.
To Next Page
Loading...
Need help?
General
