Hardware Setup
8
N150 Wireless ADSL2+ Modem Router DGN1000
Hardware Features
Before you cable your router, take a moment to become familiar with the label and the front
and back panels. Pay particular attention to the LEDs on the front panel.
Label
The label on the bottom of the wireless modem router shows the router’s factory reset button,
security PIN, preset login information, MAC address, and serial number.
Preset login information MAC address
Serial number
Security PIN
Restore Factory Settings
Figure 2. Information on the router label
See Preset Security on page 32 for information about preset security and MAC addresses.
See Factory Settings on page 96 for information about the Reset Factory Settings button and
the factory setting values.
To Next Page
Loading...
Need help?
General
