NETGEAR N150

Network Maintenance
65
N150 Wireless ADSL2+ Modem Router DGN1000
Erase
 To erase the configuration and restore to factory defaults:
Under some circumstances (for example, if you move the router to a different network or if
you have forgotten the password), you might want to erase the configuration and restore the
factory default settings.
Click the Erase button to reset the wireless modem router to its factory default settings.
Alternately, press the Wireless On/Off and WPS buttons on the side panel of the wireless
modem router simultaneously for 6 seconds.
Erase sets the user name to admin, the password to password, the LAN IP address to
192.168.1.1, and enables the wireless modem router’s DHCP.
To restore the factory default configuration settings when you do not know the login password
or IP address, use the restore factory settings button on the bottom of the router (see
Factory
Settings on page 96).
View Router Status
 To view the router status:
1. Select Maintenance > Router Status to display the following screen. The Router Status
screen provides the status and usage information described in the following figure.