Wireless Settings
32
N150 Wireless ADSL2+ Modem Router DGN1000
Preset Security
The N150 Modem Router comes with preset security. This means that the Wi-Fi network
name (SSID), passphrase, and security option (encryption protocol) are preset in the factory.
You can find the preset SSID and passphrase on the bottom of the unit.
• Wi-Fi network name (SSID) identifies your network so devices can find it.
• Passphrase controls access to your network. Devices that know the SSID and the
passphrase can find your wireless network and connect.
Note: The preset SSID and passphrase are uniquely generated for every
device to protect and maximize your wireless security.
• Security option is the type of security protocol applied to your wireless network. The
security protocol in force encrypts data transmissions and ensures that only trusted
devices receive authorization to connect to your network. The preset security option is
WPA-PSK/WPA2-PSK mixed mode described in
Wireless Security Options on page 33.
The Wireless Settings screen lets you view and change the preset security settings.
However, it is important to understand that NETGEAR recommends that you not
change your preset security settings. If you do decide to change your preset security
settings, make a note of the new settings and store it in a safe place where you can easily
find it.
Security Basics
Unlike wired network data, wireless data transmissions extend beyond your walls and can be
received by any device with a compatible wireless adapter (radio). For this reason, it is very
important to maintain the preset security and understand the other security features available
to you. Besides the preset security settings described above, your wireless modem router
has the security features described here and in
Chapter 4, Security Settings.
• Turn off wireless connectivity
• Disable SSID broadcast
• Restrict access by MAC address
• Wireless security options
To Next Page
Loading...
Need help?
General
