NETGEAR ProSafe FVG318

Reference Manual for the ProSafe Wireless 802.11g VPN Firewall Model FVG318
6-18 Basic Virtual Private Networking
v1.0, October 2005
This will cause a continuous ping to be sent to the first FVG318. After between several
seconds and two minutes, the ping response should change from “timed out” to “reply.”
Once the connection is established, you can open the browser of the PC and enter the LAN IP
address of the remote FVG318. After a short wait, you should see the login screen of the Wireless
VPN Firewall (unless another PC already has the FVG318 management interface open).
Monitoring the Progress and Status of the VPN Client Connection
Information on the progress and status of the VPN client connection can be viewed by opening the
NETGEAR ProSafe Log Viewer.
1. To launch this function, click on the Windows Start button, then select Programs, then
NETGEAR ProSafe VPN Client, then Log Viewer.
The Log Viewer screen for a similar successful connection is shown below:
Figure 6-17
Figure 6-18