NETGEAR ProSafe FVG318

Reference Manual for the ProSafe Wireless 802.11g VPN Firewall Model FVG318
Advanced Virtual Private Networking 7-9
v1.0, October 2005
VPN Policy Configuration for Manual Key Exchange
With Manual Key Management, you will not use an IKE policy. You must manually type in all the
required key information. Click the VPN Policies link from the VPN section of the main menu to
display the menu shown below.
Enable Authentication Use this check box to enable or disable ESP transform for this VPN policy.
You can select the ESP mode also with this menu.
Two ESP modes are available:
• Plain ESP
• ESP with authentication
Authentication Algorithm If you enable AH, then use this menu to select which authentication
algorithm will be employed.
The choices are:
• MD5 — the default
• SHA1 — more secure
Table 7-1. VPN – Auto Policy Configuration Fields
Field Description