NETGEAR ProSafe FVG318

Reference Manual for the ProSafe Wireless 802.11g VPN Firewall Model FVG318
5-18 Firewall Protection and Content Filtering
v1.0, October 2005
Be sure to click Apply when you have finished configuring this page.
Time Zone
The FVG318 wireless VPN firewall uses the Network Time Protocol (NTP) to obtain the current
time and date from one of several Network Time Servers on the Internet. In order to localize the
time for your log entries, you must specify your Time Zone:
• Time Zone. Select your local time zone. This setting will be used for the blocking schedule
and for time-stamping log entries.
• Daylight Savings Time. Check this box for daylight savings time.
Note: If your region uses Daylight Savings Time, you must manually select Adjust for
Daylight Savings Time on the first day of Daylight Savings Time, and unselect it at the end.
Enabling Daylight Savings Time will add one hour to the standard time.
Be sure to click Apply when you have finished configuring this menu.
Note: Enter the values as 24-hour time. For example, to specify 10:30 am, enter 10 hours
and 30 minutes; for 10:30 pm, enter 22 hours and 30 minutes.