NETGEAR ProSafe FVG318

Reference Manual for the ProSafe Wireless 802.11g VPN Firewall Model FVG318
Firewall Protection and Content Filtering 5-19
v1.0, October 2005
Getting E-Mail Notifications of Event Logs and Alerts
In order to receive logs and alerts by e-mail, you must provide your e-mail information in the Send
alerts and logs by e-mail area:
• Turn e-mail notification on. Check this box if you wish to receive e-mail logs and alerts from
the firewall.
• Send alerts and logs by e-mail. If your enable e-mail notification, these boxes cannot be
blank. Enter the name or IP address of your ISP’s outgoing (SMTP) mail server (such as
mail.myISP.com). You may be able to find this information in the configuration menu of your
e-mail program. Enter the e-mail address to which logs and alerts are sent. This e-mail address
will also be used as the From address. If you leave this box blank, log and alert messages will
not be sent via e-mail.
If your mail server requires authentication, check that box and enter the user name and
password for the e-mail address.
Figure 5-14