NETGEAR ProSafe FVG318

Reference Manual for the ProSafe Wireless 802.11g VPN Firewall Model FVG318
6-36 Basic Virtual Private Networking
v1.0, October 2005
Deleting a VPN Tunnel
To delete a VPN tunnel:
1. Log in to the Wireless VPN Firewall.
2. Click VPN Policies under VPN to display the VPN Policies screen shown below. Select the
radio button for the VPN tunnel to be deleted and click the Delete button.
Note: When NETBIOS is enabled (which it is in the VPNC defaults implemented by
the VPN Wizard), automatic traffic will reactivate the tunnel. To prevent
reactivation from happening, either disable NETBIOS or disable the policy
for the tunnel (see “Using the Policy Table on the VPN Policies Page to
Deactivate a VPN Tunnel” on page 6-34).
Figure 6-42