NETGEAR ProSafe FVG318

Reference Manual for the ProSafe Wireless 802.11g VPN Firewall Model FVG318
3-10 Connecting the Firewall to the Internet
v1.0, October 2005
Once you have entered your user name and password, your Web browser should find the
FVG318 wireless VPN firewall and display the home page as shown below.
When the wireless VPN firewall is connected to the Internet, click the Knowledge Base or the
Documentation link under the Web Support menu to view support information or the
documentation for the wireless VPN firewall.
If you do not click Logout, the wireless VPN firewall will wait five minutes after there is no
activity before it automatically logs you out.
How to Bypass the Configuration Assistant
1. When the wireless VPN firewall is in the factory default state, type
http://www.routerlogin.net/basicsetting.htm in your browser, then press Enter.
When the wireless VPN firewall is in the factory default state, a user name and password are
not required.
Figure 3-9