Reference Manual for the ProSafe Wireless 802.11g VPN Firewall Model FVG318
6-32 Basic Virtual Private Networking
v1.0, October 2005
b. Type ping 192.168.3.1.
Verifying the Status of a VPN Tunnel
To use the VPN Status page to determine the status of a VPN tunnel, perform the following steps:
1. Log in to the Wireless VPN Firewall.
2. Open the FVG318 management interface and click VPN Status under VPN to get the VPN
Status/Log screen shown below.
Figure 6-36
Note: The pings may fail the first time. If so, then try the pings a second time.
Figure 6-37
To Next Page
Loading...
