Reference Manual for the ProSafe Wireless 802.11g VPN Firewall Model FVG318
3-8 Connecting the Firewall to the Internet
v1.0, October 2005
Table 3-1. Ways to access the firewall
Firewall State Access Options Description
Factory Default
Note: The wireless
VPN firewall is
supplied in the
factory default state.
Also, the factory
default state is
restored when you
use the factory reset
button. See
“Backing Up the
Configuration” on
page 8-7 for more
information on this
feature.
Automatic Access via
the Smart Wizard
Configuration
Assistant
Any time a browser is opened on any computer connected to
the wireless VPN firewall, the wireless VPN firewall will
automatically connect to that browser and display the
Configuration Assistant welcome page.
There is no need to enter the wireless VPN firewall URL in
the browser, or provide the login user name and password.
Manually enter a URL
to bypass the Smart
Wizard Configuration
Assistant
You can bypass the Smart Wizard Configuration Assistant
feature by typing
http://www.routerlogin.net/basicsetting.htm
in the browser address bar and pressing Enter. You will not
be prompted for a user name or password.
This will enable you to manually configure the wireless VPN
firewall even when it is in the factory default state. When
manually configuring the firewall, you must complete the
configuration by clicking Apply when you finish entering your
settings. If you do not do so, a browser on any PC connected
to the firewall will automatically display the firewall's
Configuration Assistant welcome page rather than the
browser’s home page.
Configuration
Settings Have Been
Applied
Enter the standard
URL to access the
wireless VPN firewall
Connect to the wireless VPN firewall by typing either of these
URLs in the address field of your browser, then press Enter:
http://www.routerlogin.net
http://www.routerlogin.com
The wireless VPN firewall will prompt you to enter the user
name of admin and the password. The default password is
password.
Enter the IP address
of the wireless VPN
firewall
Connect to the wireless VPN firewall by typing the IP address
of the wireless VPN firewall in the address field of your
browser, then press Enter. 192.168.1.1 is the default IP
address of the wireless VPN firewall. The wireless VPN
firewall will prompt you to enter the user name of admin and
the password. The default password is password.
To Next Page
Loading...
