NETGEAR ProSafe FVG318

Reference Manual for the ProSafe Wireless 802.11g VPN Firewall Model FVG318
C-6 VPN Configuration of NETGEAR FVG318
v1.0, October 2005
The FVG318-to-FVG318 Case
Configuring the VPN Tunnel
Use this scenario illustration and configuration screens as a model to build your configuration.
1. Log in to the FVG318 labeled Gateway A as in the illustration above.
Table B-1. Policy Summary
VPN Consortium Scenario: Scenario 1
Type of VPN LAN-to-LAN or Gateway-to-Gateway
Security Scheme: IKE with Preshared Secret/Key
Date Tested:
Model/Firmware Tested:
NETGEAR-Gateway A FVG318 with firmware version v1.0
NETGEAR-Gateway B FVG318 with firmware version v1.0
IP Addressing:
NETGEAR-Gateway A Static IP address
NETGEAR-Gateway B Static IP address
Note: This scenario assumes all ports are open on the FVG318.
Figure B-5
FVS318v3
Gateway B
Scenario 1
14.15.16.17 22.23.24.25
WAN IP
WAN IP
172.23.9.1/2410.5.6.1/24
LAN IP
LAN IP
Gateway A
FVS318v3