NETGEAR ProSafe FVG318

Reference Manual for the ProSafe Wireless 802.11g VPN Firewall Model FVG318
6-24 Basic Virtual Private Networking
v1.0, October 2005
3. Fill in the IP Address or FQDN for the target VPN endpoint WAN connection and click Next.
4. Identify the IP addresses at the target endpoint that can use this tunnel, and click Next.
Figure 6-25
Figure 6-26
Enter the WAN IP address of the
remote VPN gateway:
(22.23.24.25 in this example)
Enter the LAN IP settings of the remote VPN
gateway:
• IP Address
(192.168.3.1 in this example)
• Subnet Mask
(255.255.255.0 in this example)