NETGEAR ProSafe FVG318

Reference Manual for the ProSafe Wireless 802.11g VPN Firewall Model FVG318
Advanced Virtual Private Networking 7-13
v1.0, October 2005
Encryption Algorithm If you enable ESP Encryption, then select the Encryption Algorithm:
• DES — the default
• 3DES — more secure
Key - In Enter the key in the fields provided.
• For DES, the key should be eight characters.
• For 3DES, the key should be 24 characters.
Any value is acceptable, provided the remote VPN endpoint has the same
value in its Encryption Algorithm Key - Out field.
Key - Out Enter the key in the fields provided.
• For DES, the key should be eight characters.
• For 3DES, the key should be 24 characters.
Any value is acceptable, provided the remote VPN endpoint has the same
value in its Encryption Algorithm Key - In field.
Enable Authentication Use this check box to enable or disable ESP authentication for this VPN
policy.
Authentication Algorithm If you enable authentication, then use this menu to select the algorithm:
• MD5 — the default
• SHA1 — more secure
Key - In Enter the key.
• For MD5, the key should be 16 characters.
• For SHA-1, the key should be 20 characters.
Any value is acceptable, provided the remote VPN endpoint has the same
value in its Authentication Algorithm Key - Out field.
Key - Out Enter the key in the fields provided.
• For MD5, the key should be 16 characters.
• For SHA-1, the key should be 20 characters.
Any value is acceptable, provided the remote VPN endpoint has the same
value in its Authentication Algorithm Key - In field.
Table 7-1. VPN Manual Policy Configuration Fields
Field Description