Reference Manual for the ProSafe Wireless 802.11g VPN Firewall Model FVG318
7-18 Advanced Virtual Private Networking
v1.0, October 2005
c. From the main menu Advanced section, click the LAN Setup link. The following menu
appears
d. Configure the LAN IP address according to the settings above and click Apply to save
your settings. For more information on LAN TCP/IP setup topics, please see “Configuring
LAN TCP/IP Setup Parameters” on page 9-3.
3. Set up the IKE Policy illustrated below on the FVG318.
Figure 7-8
Note: After you click Apply to change the LAN IP address settings, your
workstation will be disconnected from the FVG318. You will have to log
on with http://10.5.6.1 which is now the address you use to connect to the
built-in Web-based configuration manager of the FVG318.
To Next Page
Loading...
