NETGEAR ProSafe FVG318

Reference Manual for the ProSafe Wireless 802.11g VPN Firewall Model FVG318
Advanced Virtual Private Networking 7-23
v1.0, October 2005
b. Click the Generate Request button to display the screen illustrated below.
c. Fill in the fields on the Add Self Certificate screen.
Required fields:
– Name. Enter a name to identify this certificate.
– Subject. This is the name that other organizations will see as the holder (owner) of this
certificate. This should be your registered business name or official company name.
Generally, all certificates should have the same value in the Subject field.
– Hash Algorithm. Select the desired option: MD5 or SHA1.
– Signature Algorithm. Select the desired option: DSS or RSA.
– Signature Key Length. Select the desired option: 512, 1024, or 2048.
Optional fields:
– IP Address. If you use “IP type” in the IKE policy, you should input the IP Address
here. Otherwise, you should leave this blank.
– Domain Name. If you have a domain name, you can enter it here. Otherwise, you
should leave this blank.
– E-mail Address. You can enter you e-mail address here.
Figure 7-11