NETGEAR ProSafe FVG318

Reference Manual for the ProSafe Wireless 802.11g VPN Firewall Model FVG318
8-4 Maintenance
v1.0, October 2005
This screen shows the following statistics:
WAN Status action buttons are described in the table below:
Table 8-1. Router Statistics fields
Field Description
Interface The statistics for the WAN (Internet), LAN (local), and WLAN interfaces. For each
interface, the screen displays:
Status The link status of the interface.
TxPkts The number of packets transmitted on this interface since reset or manual clear.
RxPkts The number of packets received on this interface since reset or manual clear.
Collisions The number of collisions on this interface since reset or manual clear.
Tx B/s The current transmission (outbound) bandwidth used on the interfaces.
Rx B/s The current reception (inbound) bandwidth used on the interfaces.
Up Time The amount of time since the firewall was last restarted.
Up Time The time elapsed since this port acquired the link.
Poll Interval Specifies the intervals at which the statistics are updated in this window. Click on Stop
to freeze the display.
Table 8-2. Connection Status action buttons
Field Description
Set Interval Enter a time and click the button to set the polling frequency.
Stop Click the Stop button to freeze the polling information.