Reference Manual for the ProSafe Wireless 802.11g VPN Firewall Model FVG318
Connecting the Firewall to the Internet 3-3
v1.0, October 2005
d. Securely insert one end of the blue NETGEAR cable that came with your FVG318 into a
Local port on the router such as port 4 (point C in the illustration), and the other end into
the Ethernet port of your computer (point D in the illustration)
2. Restart your network in the correct sequence
a. First, plug in and turn on the cable or DSL modem.Wait about 2 minutes.
b. Now, plug in the power cord to your FVG318 and wait about 30 seconds.
c. Last, turn on your computer.
Figure 3-3
Warning: Failure to restart your network in the correct sequence could prevent you
from connecting to the Internet.
Note: For DSL customers, if ISP-provided software logs you in to the Internet, do not
run that software. You may need to go to the Internet Explorer® Tools menu,
Internet Options, Connections tab page where you can select the “Never dial a
connection” radio button and click Apply.
,QWHUQHW
C
D
To Next Page
Loading...
