NETGEAR ProSafe FVG318

Reference Manual for the ProSafe Wireless 802.11g VPN Firewall Model FVG318
Wireless Configuration 4-13
v1.0, October 2005
2. Click Wireless Settings in the main menu of the FVG318.
3. Select WPA with Radius on the pulldown menu. The WPA with Radius menu will open.
Encryption: There is no choice for encryption; this is displayed for your information. For
WPA with Radius, TKIP is used.
4. Enter the Radius settings.
• Primary Server Name/IP Address: This field is required. Enter the name or IP address
of the primary Radius Server on your LAN.
• Secondary Radius Server Name/IP Address: This field is optional. If you have a
Secondary Radius Server on your LAN, enter its name or IP address here.
• Radius Port: Enter the port number used for connecting to the Radius Server.
• Shared Key: Enter the desired value for the Shared Key. This must match the value used
on the Radius server.
5. Click Apply to save your settings.
Figure 4-6