Reference Manual for the ProSafe Wireless 802.11g VPN Firewall Model FVG318
4-16 Wireless Configuration
v1.0, October 2005
2. Click Wireless Settings in the main menu of the FVG318.
3. Select WPA and WPA2 with Radius on the pulldown menu. The WPA and WPA2 with
Radius menu will open.
Encryption: There is no choice for encryption; this is displayed for your information. For
WPA and WPA2 with Radius, WPA clients must use TKIP, and WPA2 clients must use AES.
4. Enter the Radius settings.
• Primary Server Name/IP Address: This field is required. Enter the name or IP address
of the primary Radius Server on your LAN.
• Secondary Radius Server Name/IP Address: This field is optional. If you have a
Secondary Radius Server on your LAN, enter its name or IP address here.
• Radius Port: Enter the port number used for connecting to the Radius Server.
• Shared Key: Enter the desired value for the Shared Key. This must match the value used
on the Radius server.
Figure 4-8
To Next Page
Loading...
