Reference Manual for the ProSafe Wireless 802.11g VPN Firewall Model FVG318
Wireless Configuration 4-19
v1.0, October 2005
2. Click Wireless Settings in the main menu of the FVG318.
3. Select WPA2-PSK on the pulldown menu. The WPA2-PSK menu will open.
4. Select the desired Encryption method. For WPA2-PSK, the only option is AES.
5. Enter the pre-shared key in the Passphrase field. Enter a word or group of printable characters
in the Passphrase box. The Passphrase must be 8 to 63 characters in length. The 256 Bit key
used for encryption is generated from this passphrase.
6. Enter the Key Lifetime. This setting determines how often the encryption key is changed.
Shorter periods provide greater security, but adversely affect performance. If desired, you can
change the default value.
7. Click Apply to save your settings.
Figure 4-10
To Next Page
Loading...
