NETGEAR ProSafe FVG318

Reference Manual for the ProSafe Wireless 802.11g VPN Firewall Model FVG318
Basic Virtual Private Networking 6-7
v1.0, October 2005
1. Log in to the FVG318 at its LAN address of http://192.168.1.1 with its default user name of
admin and password of password. Click the VPN Wizard link in the main menu to display
this screen. Click Next to proceed.
2. Fill in the Connection Name and the pre-shared key, select the type of target end point, and
click Next to proceed.
Figure 6-4
Note: The Connection Name is arbitrary and not relevant to how the configuration
functions.
Figure 6-5
Enter the new Connection Name:
(RoadWarrior in this example)
Enter the pre-shared key:
(12345678 in this example)
Select the radio button:
A remote VPN client (single PC)